• Welcome to Elio Owners! Join today, registration is easy!

    You can register using your Google, Facebook, or Twitter account, just click here.

Metal...body?

Darrellh

Elio Aficionado
Joined
Nov 15, 2014
Messages
47
Reaction score
96
Location
Nh
i will probably still purchase an Elio since I'm all in, but am very disappointed that it is going to be steel. I believe Elio is right in it being cheaper, and easier to make and more recyclable, but not as ecological as I probably won't keep it as long because in the rust belt it's appearance won't hold up as well. Will probably treat it as a cheap DISPOSABLE car and not buy as many options for it.
 

Darrellh

Elio Aficionado
Joined
Nov 15, 2014
Messages
47
Reaction score
96
Location
Nh
I t doesn't make sense to me to make the test prototypes with SMC if you want representative results for many of the tests, though I realize they are already set up for SMC, so would probably be quicker To produce.
 

Ty

Elio Addict
Joined
Feb 28, 2014
Messages
6,325
Reaction score
14,761
Location
Papillion, NE
I haven't had any rust problems in any of my vehicles since the 1965 Mustang. If you see any Saturn Vue's or Saturn Ski's on the road, look at all the space between panels. Apparently, the plastic expands and contracts more than its steel equivalent so bigger spaces are necessary. Steel panels should help make the Elio look more like a "Real" car. I'm happy to see they are going with steel. It'll mean for cheaper dent repair if needed!
 

pistonboy

Elio Addict
Joined
Nov 10, 2014
Messages
2,026
Reaction score
4,334
Location
CA
I was looking forward to SMC for the body panels. I believe it would vibrate less thus making the vehicle less noisy. Perhaps undercoating helps reduce noise, but it is difficult to undercoat every inch of the body.

Before I wondered by Paul Elio refered to the steel structural members as "unibody" when that term usually means both steel structural members and steel body panels. Now I know why. It is going to be a traditional unibody structure with both structural members and body panels made of steel. He was using this term several weeks ago meaning this decision was made several seeks ago.
 

pistonboy

Elio Addict
Joined
Nov 10, 2014
Messages
2,026
Reaction score
4,334
Location
CA
Perhaps the early E series will have composite body panels, but the later ones used for safety crashing will have steel body panels. Otherwise, it is testing one thing but selling us something else.
 

Ty

Elio Addict
Joined
Feb 28, 2014
Messages
6,325
Reaction score
14,761
Location
Papillion, NE
The change doesn't bother me. It sort of makes sense they probably want to utilize more of the stamping equipment at the Shreveport plant
Not to mention you can stamp several panels per minute with a single press but you can't do the same with composite material which means more stations would be required. To me, this will bring the Elio to production must faster than relying on developing some composite process. So, yay, team Elio!
 
Top Bottom